It is likely that at some point you thought about dedicating yourself to carpentry, whether amateur or hobby. Then, from Cronoshare we present a series of basic carpentry tips for beginners, useful for all those who want to start in this world.
If you want to know the basic woodworking tips for beginners, read on.

Basic carpentry tips for beginners

Have a variety of tools

If you are starting in the carpentry, you will not have many tools, but they should be varied. In addition to the workbench, you should have tools for measuring and marking, sawing, brushing, sanding and some auxiliary tools.

Keep your tools well

For a correct conservation of the tools, these can not be stored in any way. Tools that have a delicate edge, for example, should be kept in a suitable position so that it is not damaged by poor position or contact with other tools.

Store tools in dry locations to prevent rusting and deterioration. If you order them by their function you will also avoid having to be stirring every time you need to look for one.

Buy or build a good workbench

You can not do good carpentry work without a proper workbench. Acquire or build a large workbench, which allows you to carry out all kinds of works. Try to be in a secluded place, where you do not disturb or interfere with other rooms of the house.

Try to keep the workbench well preserved and clean, since it will be the place where you will carry out all your projects.

The proper measurement is essential

Always measure the materials you are going to use for a project, the workspace, the place where you will put the work … Take measures of everything you can, since a wrong measurement can create a domino effect that can have disastrous results on The final project.

How to sand a surface

When working with wood, sanding is a key step in preparing the surface. If you do not have experience in the matter, experts recommend starting with a coarse sandpaper, then finishing with a finer sandpaper. It is also important to sand in the direction of the grain.

If you want to know if a sandpaper is of good quality, the simplest is to fold it. If grains fall, the paper is not of the recommended quality and it will be better to use another.
How to varnish wood
After sanding, varnishing the wood is another of the most important phases in carpentry. In this case, you have to take care of two very important aspects: the brush, which should be as large and flat as possible, and porosity. Check if the wood is more or less porous to choose the best varnish and know how many layers to apply.

If the wood has small details, use a smaller brush and round to varnish them.

How to avoid splintering wood

One of the main problems that arise when cutting the wood is the splintering. That is to say, that when cutting the wood is splintered and a clean cut is not produced. There are several ways to avoid it.

The most important thing is that your tools are in good condition and sharp. Also, make sure you use the correct saw for each type of wood. Not all tools will cut equally on all materials. Another trick is to use a piece of discarded wood to support the piece you are cutting.

How to nails without getting hurt

Surely starting the carpentry world one of your biggest concerns was like hammering a nail without suffering in the attempt. Several tricks will facilitate this task. If the nail is large, you can use the prongs of a comb to hold it while nailing it. If it is smaller, you can nail it in a piece of cardboard so that it is erected at the time of nailing it, without having to use your fingers.

Practice a lot

Practice makes a master. Although at first, it costs you to carry out some projects, keep trying. No one is born learning, and carpentry is a technique that can be improved with constancy and practice. Read articles, search YouTube videos, invent, be creative …

There are many ways to improve your carpentry skills!

Trust a professional

If you see that a project is getting out of hand or you do not have enough skills to carry it out, do not hesitate to hire a professional carpenter. Leaving the project in good hands will avoid risks to your health and will not damage the materials, which can sometimes have a high cost.

In Cronoshare we have the best carpenters, who can help you to carry out any work or project. You just have to ask for a quote through this link for free and without commitment, and you will start receiving in your email the professionals closest to you. You will be able to contact them, ask for price and reach the best agreement between the two parties. In just a few steps you will have hired the carpenter that best suits your needs.